Hybrid 46M Manual
SPEC SHEET
2024 CATALOG
PISTON FIT GUIDE
Hybrid 46M User Guide
Hybrid 46M User Guide
Hybrid 46M Manual
SPEC SHEET
2024 CATALOG
PISTON FIT GUIDE
Hybrid 46M User Guide
Check out our videos for the Hybrid 46M
Accessories for the Hybrid 46M User Guide
$94.00
The SilencerCo 3-port Muzzle Brake is designed to redirect a portion of the propellant gases to counter recoil and reduce muzzle climb, enhancing accuracy and control with every shot. Crafted from premium materials and precision-engineered for superior performance, the muzzle brake is the ultimate choice for serious shooters. Each ASR Muzzle Brake comes with a shim set and rocksett for easy application.
The SilencerCo Muzzle Brake has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this 3-port muzzle brake for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
New *RAW Finish – Same durability and corrosion resistance, but with the popular heat treated finish.
ASR Mounts:
Alpha: Harvester 300 and Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
Available Variations: Thread Pitch | Caliber [SKU] Black Nitride Finish
Available Variations: Thread Pitch | Caliber [SKU] Black Nitride Finish
- 1/2 x 28 | .223 Cal / 5.56mm [AC142]
- 1/2 x 28 | .30 Cal / 7.62mm [AC1282]
- 9/16 x 24 RH | .30 Cal [AC1276]
- 9/16 x 24 RH | 9mm [AC4766]
- 5/8 x 24 | .30 Cal / 7.62mm [AC591]
- 5/8 x 24 | .338 Cal [AC857]
- 5/8 x 24 | .458 Cal [AC1733]
- 5/8 x 32 | .458 Cal [AC1557]
- 11/16 x 24 | .458 Cal [AC1961]
- 3/4 x 24 | .338 Cal [AC858]
- 3/4 x 24 | .458 Cal [AC2631]
- M18 x 1 | .338 Cal [AC856]
- M18 x 1.5 | .338 Cal [AC855]
- 1/2 x 28 | .223 Cal / 5.56mm [AC5590]
- 1/2 x 28 | .30 Cal [AC5592]
$94.00
The SilencerCo Single Port Muzzle Brake is designed to redirect a portion of the propellant gases to counter recoil and reduce muzzle climb, enhancing accuracy and control with every shot. Crafted from premium materials and precision-engineered for superior performance, the muzzle brake is the ultimate choice for serious shooters. Each ASR muzzle brake comes with a shim set and rocksett for easy application.
The SilencerCo Muzzle Brake has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this 3-port muzzle brake for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
New *RAW Finish – Same durability and corrosion resistance, but with the popular heat treated finish.
ASR Mounts:
Alpha: Harvester 300 and Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
Available Variations: Thread Pitch | Caliber [SKU] Black Nitride
Available Variations: Thread Pitch | Caliber [SKU] Black Nitride
- 1/2 x 28 | 9mm [AC2628]
- 5/8 x 24 | .30 Cal [AC2627]
- 1/2 x 28 | 9mm [AC5591]
- 5/8 x 24 | .30 Cal [AC5593]
$94.00
The SilencerCo ASR Flash Hider significantly suppresses muzzle flash, safeguarding the shooter's vision, especially in low-light environments. Engineered for maximum effectiveness, this flash hider keeps your shots discreet and on target. Enhance your shooting experience with reduced flash signature and superior control. Additionally, the SilencerCo Flash Hider utilizes a patent-pending resonance suppression method that effectively eliminates the tuning-fork effect common with competing 3-prong Flash Hiders.
The SilencerCo ASR Flash Hider has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this flash hider for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
New *RAW Finish - Same durability and corrosion resistance, but with the popular heat treated finish.
ASR Mounts:
Alpha: Harvester 300, Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
Available Variations:
Thread Pitch | Caliber [SKU]
Black Nitride Finish
- 1/2 x 28 | .223 Cal / 5.56mm [AC141]
- 1/2 x 28 | .30 Cal / 7.62mm [AC1283]
- 1/2 x 28 | .36 Cal / 9mm [AC1570]
- 1/2 x 36 | .36 Cal / 9mm [AC1562]
- 9/16 x 24 LH | .30 Cal [AC1278]
- 5/8 x 24 | .30 Cal / 7.62mm [AC590]
- M13.5 x 1 LH | 9mm [AC1561]
- 15 x 1 RH (HK Specs Only) | .30 Cal / 7.62mm [AC233]
- 1/2 x 28 | .223 Cal / 5.56mm [AC5586]
- 1/2 x 28 | 9MM [AC5588]
- 5/8 x 24 | .30 Cal [AC5587]
$94.00
The SilencerCo Closed-Tine Flash Hider significantly suppresses muzzle flash, safeguarding the shooter's vision, especially in low-light environments. Its special closed-tine design reduces the risk of snagging on branches or gear during field use. Crafted for maximum effectiveness, this closed-tine flash hider keeps your shots discreet and on target, adding a badass look to any firearm. Enhance your shooting experience with reduced flash signature and superior control.
The SilencerCo Closed-Tine Flash Hider has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this flash hider for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
ASR Mounts:
Alpha: Harvester 300, Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
SKUs: AC5326 - 1/2" x 28 threads for .223 cal / 5.56mm
$139.00 – $162.00
The (ASR) Active Spring Retention Mount is a quick attached / detach system for your suppressors that pairs with the ASR Flash Hider, ASR Closed-Tine Flash Hider, ASR Muzzle Brake, and ASR Single Port Muzzle Brake and is one of the best performing mounting systems available for rifles. The locking ring ensures that the suppressor will not rotate while in use. The mount seats over your ASR Muzzle Device and creates a direct connection to your suppressor, allowing for the use of the muzzle device with the suppressor for even better performance.
- Alpha accessories are compatible with the Spectre 9, Omega K Series, and Alpha MAAD Brakes
- Bravo accessories are compatible with Omega 300, Hybrid 46, Scythe-Ti, and Bravo MAAD Brakes
- Charlie accessories are compatible with Chimera 300, Omega 36M, Hybrid 46M, Saker 556K, Velos LBP Series, and Charlie MAAD Brakes.
$99.00
Our Direct Thread Mounts are a simple solution to attach our silencers to almost any firearm. Compared to the ASR Mount, the Direct Thread Mount shortens the overall length of the suppressor. With many thread pitch and caliber options, your silencer is ready to shoot on almost any platform.
Compatible with:
- Omega 36M
- Hybrid 46M
- Chimera 300
- Saker 556K
- Velos LBP Series
- Charlie MAAD Brake
- 5/8 x 24 (AC4743)
- 1/2 x 28 (AC4740)
- 9/16 x 24 (AC4744)
- 11/16 x 24 (AC4741)
- 3/4 x 24 (AC4742)
- M13 x .75 (AC4745)
- M18 x 1 (AC4747)
- M18 x 1.5 (AC4748)
$94.00
The TOMD (Thread Over Muzzle Device) Compact Radial Brake reduces felt recoil without the need for being timed to the firearm it's attached to. This radial brake is easy to install and can quickly pair with the Thread Over Mount to attach your suppressor. This smaller form Radial Brake is lightweight, and offers superb recoil reduction in a tighter, compact package.
Compatible with the (TOM) Thread Over Mounts, a quick attach / detach system for your suppressors that pairs with the TOMD Compact Radial Brake. This system combines the utility of the ASR Mounts with the ease of use of the Direct Thread Mounts.
SKUs:
- AC5232 - 1/2" x 28 threads for .30 cal
- AC5233 - 5/8" x 24 threads for .30 cal
$109.00 – $119.00
The (TOM) Thread Over Mounts are a quick attach / detach system for your suppressors that pairs with the TOMD Compact Radial Brake. This system combines the utility of the ASR Mounts with the ease of use of the Direct Thread Mounts. The Thread Over Mount screws on top of the Radial Brake to set the suppressor cleanly on the end of your rifle. This is an elegant solution to suppressor mounting for everyday use.
- Bravo accessories are compatible with Omega 300, Hybrid 46, Scythe-Ti, and Bravo MAAD Brakes
- Charlie accessories are compatible with Chimera 300, Omega 36M, Hybrid 46M, Saker 556K, Velos LBP Series, and Charlie MAAD Brakes.
- Bravo TOM Thread Over Mount (AC5230)
- Charlie TOM Thread Over Mount (AC5229)
$139.00
For use only with the Omega 36M and Hybrid 46M. This mount is used to attach your silencer to handguns when used with a piston.
A separate piston is required for this mount. Quality pistons in a variety of thread patterns are sold separately - CLICK HERE
With the Spring and Piston removed, a 3-Lug mount can be inserted into the threads of the Charlie Piston Mount, allowing for use of a 3-Lug Mount with the Omega 36M, and the Hybrid 46M.
SKU: AC4751
$94.00
Designed to switch easily between different calibers, this cap ensures optimal performance for both suppressors and MAAD brakes. Using correct front caps will reduce dB levels between 2 to 5 dB on a suppressor.
Compatible with:
- Omega 36M
- Hybrid 46M
- Chimera 300
- Saker 556K
- Velos LBP Series
- Charlie MAAD Brake
$99.00
Engineered for extreme heat resistance, this cover shields your suppressor from scorching temperatures. Keep your firearm cool and maintain peak performance, even during rapid fire. Upgrade your setup with the ultimate high-temperature protection.
*Rated up to 1600 degrees Fahrenheit
FIT GUIDE
6” Suppressor Cover:
- Harvester EVO
- Octane 9, Octane 45K
- Saker 556
- Omega 300
- Hybrid 46M in short configuration
- Omega 36M in long configuration
- Octane 45,
- Saker 762
- Specwar 762
- Harvester 300
- Hybrid 46
- Hybrid 46M in long configuration
- BLACK 6" HIGH TEMP (AC1983)
- BLACK 7.5" HIGH TEMP (AC1984)
- GREY 6" HIGH TEMP (AC1981)
- GREY 7.5" HIGH TEMP (AC1982)
- FDE 6" HIGH TEMP (AC1985)
- FDE 7.5" HIGH TEMP (AC1986)
$129.00
Unleash your suppressor's full potential in any environment. Engineered from Kevlar and Nomex for extreme temperature resistance, this cover ensures peak performance in scorching heat or freezing cold. Elevate your shooting experience with unmatched protection and reliability. The cinch-style cording keeps your cover tightly in place even when shooting high-recoil calibers.
*Rated up to 2500 degrees Fahrenheit
FIT GUIDE
5.5” Suppressor Cover:
- Velos LBP 556
- Scythe-Ti
- Harvester EVO
- Octane 9, Octane 45K
- Saker 556
- Omega 300
- Hybrid 46M in short configuration
- Omega 36M in long configuration
-
- Octane 45
- Saker 762
- Harvester 300
- Hybrid 46
- Hybrid 46M in long configuration
- 5.5" Extreme Temp (AC5378)
- 6" Extreme Temp (AC5170)
- 7.5" Extreme Temp (AC5171)
$39.00
Introducing the Omni Tool. This tool is the universal SilencerCo tool, capable of handling Alpha, Bravo, Charlie compatible suppressors and accessories. This tool is the Bravo Multi Tool, Charlie Multi Tool, and Alpha Piston Tool, all in one tight package. It also has a bottle opener on the side to make it an every day carry tool, and a carabiner slot so that you can easily pack it to the range. It is built to tighten and remove front caps, mounts, and muzzle devices. Can be used with a Spanner Wrench to remove mounts from the suppressor bodies.
To top it off, every Omni Tool ships in a large suppressor sleeve in case you need an extra, or just want to keep the Omni Tool's matte black finish perfect.
Compatible with:
- Scythe-Ti
- Harvester Evo
- Omega 300
- Hybrid 46
- Omega 36M
- Hybrid 46M
- Saker ASR
- Chimera 300
- Velos LBP
- Octane Series
- Omega K Series
- Osprey 2.0
$20.00
Replacement spanner wrench for suppressors using the "Bravo" and "Charlie" size ASR mounts: Omega 300, Hybrid 46M, Harvester EVO, Hybrid 46, Saker series, Chimera 300, and Omega 36M. Can be used in conjunction with the Bravo or Charlie Multitool to remove mounts from the suppressor body.
$20.00
Replacement multitool for Omega 36M, Hybrid 46M, Chimera 300, Saker ASR Series, and Velos LBP suppressors. Used to remove mounts, front caps, and muzzle devices.
